Interior electrical installation
Declaration or regularization of interior installations in homes, commerce, buildings, industries and consumer areas.
SEC Electrical Certification and TE Processing
Technical review, measurements, documentation and support to declare, regularize or commission electrical installations before the SEC, identifying the correct procedure according to the type of project.
← Back to services
Visual material in preparation
Technical gallery pending selection
We are selecting our own photographs that are representative of the service. We will soon incorporate manually reviewed images to accurately show the technical work.
SEC electrical procedures
We identify the correct procedure according to the type of installation and the actual status of the project.
Public lighting
Commissioning of public lighting works, luminaires, panels, circuits and associated systems.
electric fence
Declaration of energized electric fence installations for perimeter security.
Distributed generation / BESS
Commissioning of residential generators, solar PV systems, distributed generation, efficient cogeneration and BESS storage where applicable.
Electric vehicle charging
Commissioning of charging infrastructure, chargers, electric stations, buildings, fleets, electric terminals and charging points.
PMGD
Communication or energization of PMGD facilities connected to distribution networks, depending on the scope of the project.
Technical scope
Declaring a facility requires more than completing a form.
Before entering an SEC declaration, we review the facility, the available history and the technical conditions that may affect security, operational continuity and acceptance of the procedure.
- Identification of the applicable SEC procedure according to the type of installation: TE-1, TE-2, TE-3, TE-4, TE-6 or TE-7.
- Review of panels, protections, circuits, conduits, grounding, splicing, equipment and visible safety conditions.
- Electrical measurements and tests according to scope: continuity, insulation, grounding, differentials, polarity and functional verifications.
- Preparation and organization of plans, reports, forms, technical sheets, photographic backups and required documentation.
- Support in regularization, declaration, collection of observations and technical coordination of the process.
When do you need this service
When should it be requested?
You need to regularize an existing electrical installation.
You require TE-1 for reception, rental, sale, expansion, connection or commissioning.
Your installation was observed and you need technical support to correct it.
You are going to install electric vehicle chargers and you need TE-6.
You have a solar, BESS or distributed generation project and you need to check if TE-4 applies.
Your project corresponds to PMGD and requires technical support for TE-7.
Work process
Simple and traceable process
Diagnosis of the procedure
We review background, type of installation, power, location and purpose of the certificate.
Technical review and measurements
We verify the electrical conditions on the ground and make observations if they exist.
Documentation and declaration
We order technical backups and support the filing or regularization with the SEC as appropriate.
Do you need to certify or regularize an electrical installation?
Send us the location, type of installation, approximate power, photographs of the board, available background information and objective of the procedure. With that information we review the scope and show you the right path.
For a faster quote, send:
- Address or commune.
- Installation type.
- Approximate power.
- Photographs of board, splicing and main equipment.
- Plans, report or previous certificate if it exists.
- Objective of the procedure: TE-1, regularization, EV recharge, generation, PMGD or other.
Transparency: Registration or acceptance of an SEC statement depends on the technical compliance of the facility, the available history and the corresponding review. If there are observations, the necessary corrections will be reported before continuing. Technical service is priced according to scope; SEC procedures may have their own conditions depending on the platform and type of declaration.
Technical commercial service
When it is worth requesting sec electrical certification and te processing
This block summarizes common searches, hiring situations, deliverables and frequent questions for engineering, maintenance, operations and industrial owners.
- You need technical criteria before buying, modifying, energizing or maintaining electrical assets.
- Your team needs objective measurements, engineering review or commissioning evidence.
- There are operational risks, regulatory requirements or reliability targets to support.
- You need a clear report to make decisions, respond to observations or plan corrections.
- You need technical support to review specifications, suppliers or engineering documentation.
- Technical review report with scope and findings
- Measurement records or documentary evidence when applicable
- Photographic or field notes for traceability
- Conclusions and prioritized technical recommendations
- Support for engineering, technical audit or commissioning.
Frequently asked questions
What information is needed to quote?
Location, type of installation, available drawings, photos, objective of the work and any previous technical report help define the scope.
Can the service be adapted to an operating plant?
Yes. The scope can be planned around operating restrictions, safety conditions and available shutdown windows.
Does IONIZE deliver technical reports?
Yes. The deliverable can include measurements, observations, evidence and recommendations according to the agreed scope.
Can you support commissioning or corrective actions?
Yes. We can support review, testing, verification and technical criteria for commissioning or corrective work.
Knowledge center
Related technical readings
Types of SEC electrical certifications in Chile: TE1, TE2, TE3, TE4, TE6 and TE7 explained
SEC RIC specifications: practical guide for electrical students and professionals
Initial Verification Tests
Grounding: study, design, calculation and measurements for safe electrical systems
NFPA 70E Explained: Electrical Workplace Safety and Electrical Risk Control